基于多维约束的食品包装设计

通过分析与研究,提出食品包装的多维约束设计模型,阐明其区别于传统包装设计的优势。并从需求约束、目标约束、资源约束3个维度构建食品包装多维约束设计模型。通过研究用户需求、市场需求、甲方要求、资源限制等,得到相关约束条件下对应的不同设计映射域。从而明确食品包装设计中色彩、图形、规格、风格、文化等要素,最终完成设计。通过乾州挂面包装设计的实际案例验证了方法和模型的可行性。     

基于PSCAD/EMTDC软件的高压直流输电仿真教学研究

针对“高压直流输电”课程教学过程中,高压直流系统控制原理复杂抽象,直观上难以理解的特点,本文通过运用PSCAD/EMTDC仿真软件,基于CIGRE HVDC标准测试模型,对高压直流输电系统在整流侧和逆变侧交流系统分别发生故障时的运行特性进行仿真测试。教学实践表明,PSCAD/EMTDC软件的应用加强了学生对理论知识的理解,激发和培养了学生的学习兴趣和动手实践能力,有效地提升了教学效果。     

基于BOPPPS模型的数字电路实验教学设计

针对目前军队院校“数字电路”课程实验环节中存在的学员参与度不高、实验方式固化、灵活性不够等问题,提出将BOPPPS模型和Multisim软件引入到实验过程中。以“时序逻辑电路设计”一节内容为例,按照导入、目标、前测、参与式学习和后测、总结等六个环节进行“四人抢答器实验”的实验教学设计。实践结果表明,该方法能有效解决传统实验环节存在的问题,激发学员学习兴趣,取得了较好的教学效果。     

A benchmark data set for two-phase Coriolis metering

For more than a decade there has been growing interest in the use of Coriolis mass flow metering applied to two-phase (gas/liquid) and multiphase (oil/water/gas) conditions. It is well-established that the mass flow and density measurements generated from multiphase flows are subject to large errors, and a variety of physical models and correction techniques have been proposed to explain and/or to compensate for these errors. One difficulty is the absence of a common basis for comparing correction techniques, because different flowtube designs and configurations, as well as liquid and gas properties, may result in quite different error curves. Furthermore, some researchers with interests in the modelling aspects of the field may not have suitable multiphase laboratory facilities to generate their own data sets. This paper offers a small data set that may be used by researchers as a benchmark i.e. a common data set for comparing correction techniques. The data set was collected at the UK National Flow Laboratory TUV-NEL, using air and a viscous oil, and provides experimental points over a wide flow range (8:1 turndown) and with Gas Volume Fraction (GVF) values up to 60%. As a first investigation using the benchmark data set, we consider how data sparsity (i.e. the flow rate and GVF spacing in the experimental grid) affects the accuracy of a correction model. A range of neural network models are evaluated, based on different subsets of the benchmark data set. The data set and some exemplary code are provided with the paper. Additional data sets are available on a web site created to support this initiative.     

On the prediction of solubility of alkane in carbon dioxide using the LSSVM algorithm

The increasing global energy demand and declination of oil reservoir in recent years cause the researchers attention focus on the enhancement of oil recovery approaches. One of the extensive applicable methods for enhancement of oil recovery, which has great efficiency and environmental benefits, is carbon dioxide injection. The CO₂ injection has various effects on the reservoir fluid, which causes enhancement of recovery. One of these effects is extraction of lighter components of crude oil, which straightly depends on solubility of hydrocarbons in carbon dioxide. In order to better understand of this parameter, in this study, Least squares support vector machine (LSSVM) algorithm was developed as a novel predictive tool to estimate solubility of alkane in CO₂ as function of carbon number of alkane, carbon dioxide density, pressure, and temperature. The predicting model outputs were compared with the extracted experimental solubility from literature statistically and graphically. The comparison showed the great ability and high accuracy of developed model in prediction of solubility.     

高伸长率冷轧双相钢DP980显微组织及性能

摘要：为了进一步提高冷轧双相钢DP980的强塑性，采用低C-Si-Mn-Nb-Cr成分，通过调整连续退火工艺参数，系统研究了工艺组织性能的关系，利用OM、SEM、EBSD分析了不同退火温度条件下各相的比例、尺寸、形貌、分布，同时利用力学拉伸试验手段研究了连退两相区退火温度对强塑性的影响。结果表明，通过优化调整连续退火工艺，不仅可以在冷轧铁素体和马氏体双相钢的组织上获得少量的残余奥氏体，也能细化再结晶晶粒，最终获得ReL/Rm≤0.5、高伸长率A50≥15%的冷轧DP980，提高强塑性的同时改善了成型性能。     

柴达木盆地三湖坳陷横波勘探中的低幅异常消除技术

近年来,在柴达木盆地三湖坳陷开展了横波地震勘探,但是由于该区低幅度构造发育,横波静校正引起的"低幅"异常与上述低幅度构造相互混杂,难以区分。为此,针对该区横波表层调查难以控制表层横波速度模型的变化、横波近偏移距初至污染严重、横波折射层发育导致高速界面难以确定等问题,首先采用曲线拟合技术预测污染区横波初至时间确保初至完整性,然后采用面波模型与多层折射分层联合约束反演横波表层速度,最后通过基于速度谱分析的层位匹配建模技术确定合理的横波速度界面,形成了横波表层"低幅"异常消除技术,并进行了现场应用及效果评价。研究结果表明:①曲线拟合技术可以弥补近道污染区横波初至空白,保证层析反演模型的完整性;②基于瑞雷波的频散特性反演建模可以为确定该区浅层横波速度提供可靠的资料,提高浅层模型精度;③面波模型与多层折射分层联合约束反演能够更准确的反演该区表层横波速度场,较好地建立横波速度模型,消除横波剖面上"低幅"异常现象。结论认为,所形成的横波地震勘探低幅异常消除技术消除了横波静校正引起的"低幅"异常现象,提高了横波地震资料的成像品质。     

Evaluation of dynamic modulus measurement for C/C-SiC composites at different temperatures

The determination of elastic properties at application temperature is fundamental for the design of fibre reinforced ceramic composite components. An attractive method to characterize the flexural modulus at room and high temperature under specific atmosphere is the nondestructive Resonant Frequency Damping Analysis (RFDA). The objective of this paper was to evaluate and validate the modulus measurement via RFDA for orthotropic C/C-SiC composites at the application temperature. At room temperature flexural moduli of C/C-SiC with 0/90° reinforcement were measured under quasi-static 4-point bending loads and compared with dynamic moduli measured via RFDA longitudinally to fibre direction. The dynamic modulus of C/C-SiC was then measured via RFDA up to 1250°C under flowing inert gas and showed an increase with temperature which fitted with literature values. The measured fundamental frequencies were finally compared to those resulting from numerical modal analyses. Dynamic and quasi-static flexural moduli are comparable and the numerical analyses proved that bending modes are correctly modeled by means of dynamic modulus measured via RFDA. The nondestructive RFDA as well as the numerical modeling approach are suitable for evaluation of C/C-SiC and may be transferred to other fibre reinforced ceramic composite materials.     

基于XML的信息物理融合系统组件建模与仿真

信息物理融合系统（CPS）涉及多种计算模型的集成和协同工作，针对CPS设计方法不统一、重塑性差、复杂度高、难以协同建模验证等问题，提出一种结构化、可描述行为的异元组件模型。首先，用统一组件建模方法进行建模，解决模型不开放问题；然后，用可扩展标记语言（XML）规范描述各类组件，解决不同计算模型描述语言不一致和不可扩展问题；最后，用多级开放组件模型的协同仿真验证方式进行仿真验证，解决验证的不可协同问题。通过通用组件建模方法、XML组件规范描述语言以及验证工具平台XModel对医用恒温箱进行了建模、描述和仿真。医用恒温箱的案例表明，这种模型驱动建立可重塑异元组件并确认其设计正确性的过程，支持信息物理协同设计和边构建边纠正，可避免在系统实现过程中发现问题时再进行反复修改。